HUNTING End-Barrel Suppressor with universal-device for thread- or clamp-adapter - Ideal for calibres from .308 / 7,62

• TYPE: combination suppressor with universal device with thread- or clamp-adapter
• SCOPE OF DELIVERY: End-Barrel Suppressor with universal device + adapter
• FEATURES:
  • Weight: approx. 740 g
  • Diameter: 48 mm
  • Overall length: 273 mm
  • Length from muzzle: 248 mm (thread-adapter) / 231 mm (clamp-adapter)
  • THREAD-ADAPTER: Suitable for barrel thread and VOERE muzzle brakes with thread.
  • CLAMP-ADAPTER: Suitable for calibres up to 6.5 / .25
  • Material: combination from carbon / steel / aluminium
  • Stainless steel cover
  • Barrel thread (thread-adapter): see list
  • Carbon outer jacket
  • Finishing: carbon / black
• CALIBRE: .22 / 5,56 - .408 / 10,3 (Please specify calibre when ordering.)
• REDUCTION: ≥ 30 dB (c) (depending on calibre, ammunition, measurement point, barrel length, load)
• DAMPING: Interchangeable aluminium or steel baffles (7 pieces) (depending on calibre)
• OTHER: The suppressor must be mounted with a thread- or clamp-adapter. The suppressor with thread-adapter is screwed onto the barrel by means of a muzzle thread and can simply be unscrewed when not in use. A thread length of at least 10 mm is required. | The suppressor with clamp-adapter is mounted with the help of the sight bolt and can therefore be easily attached and removed. Thanks to this innovative adapter, no new proof shooting is necessary.

PERMISSION: Please observe the legal regulations for the purchase and use of silencers in the respective countries/federal states.

Tested with ammunition: All ammunitions can be found in the operating instructions in the download area.